The binary input/ output actuator Vivo® NANNA KNX is a S-mode KNX rail mounting modular device for sensing technical binary signals and for independent
switching electrical loads (single or groups). To operate the device receives a telegram from the bus, sent by a KNX device (such as a pushbutton, a sensor or
another switching or control device), that causes the opening or the closing of one or more relays.
The inputs are designed to detect any dry contact such as conventional switches and buttons, the contact scanning voltage is supplied by the input actuator.
The cables connecting the switches/buttons to the input interface may be run for up to 100m.
Power supply / Alimentazione: Loads 230V 50/60Hz - Electronics: 30Vdc from KNX Bus / Carichi 230V
50/60Hz - Elettronica: 30Vdc dal Bus KNX
Current consumption from bus/ Assordimento di corrente dal bus: < 5 mA
Maximum output from bus / Potenza max dal bus: < 450 mW
Classification / Classificazione: Climate / Climatica: 3K5 - Mechanical / Meccanica: 3M2 (secondo EN 50491-2)
Pollution degree / Grado di inquinamento:2 (according to IEC 61140) / 2 (secondo IEC 61140)
Protection Rating / Grado di protezione: IP20
Installation / Montaggio: on 35 mm rail (according to EN 60715) / su guida profilata da 35 mm (secondo EN 60715)
Size / Dimensioni: 90x157,5x58mm - 400g - 9 DIN REG
Operation / Funzionamento: from -5°C to 45°C / da -5°C a 45°C
Storage / Conservazione: from -25°C to 70°C / da -25°C a 55°C
Transportation / Trasporto: from -25°C to 70°C / da -25°C a 70°C
Relative humidity (non condensing)/ Umidità relativa (non condensante): 95%
The device complies with the Low Voltage Directive (2006/95/EC) and the Electromagnetic
Compatibility Directive (2004/108/EC). Tests carried out according to: / Il
prodotto è conforme alla Direttiva Bassa Tensione (2006/95/CE) e alla Direttiva sulla
Compatibilità Elettromagnetica (2004/108/CE). Test effettuati conformemente a: EN 50090-2-2, IEC 60664-1
